# Heart rate recovery

How far your heart rate drops in the minute after a workout.

Canonical page: https://pulse.portlabs.in/metrics/heart-rate-recovery/

## What goes in

- **End heart rate:** The highest reading in the last 30 seconds of the activity.

- **One minute later:** The median reading 45-75 seconds after the end, from at least 3 readings.

## How it is weighted

Heart rate recovery = end heart rate − heart rate one minute later, in bpm. It is measured only after a hard enough finish: at least 2 minutes in a row at 70% or more of your max heart rate within the last 5 minutes.

## What the bands mean

- **20 bpm or more:** Good

- **12-19 bpm:** Typical

- **Below 12 bpm:** Low

## A worked example

Take a 36-year-old finishing a steady run of about 17 minutes. Pulse's default max heart rate for that age is about 183 bpm, so the 70% line is 128 bpm. For the last 5 minutes of the run the watch records between 160 and 174 bpm, well above the line for far longer than the 2 minutes required, so the workout is eligible.

Next Pulse takes the highest reading in the final 30 seconds. Here that is 174 bpm. It then collects every reading from 45 to 75 seconds after the workout ended. Six readings fall in that window: 146, 146, 148, 149, 149 and 150 bpm. The median of an even count is the average of the middle two, 148.5, rounded half up to 149.

Heart rate recovery is 174 minus 149, so 25 bpm. That is 20 or more, which Pulse calls Good. These numbers come from running Pulse's own heart rate recovery function on that set of readings.

Change one thing and the answer moves. If the same runner had kept walking for the first minute and the median had been 160, the drop would be 14 bpm, which is Typical. If the watch had logged only two readings in the window, Pulse would show Not enough heart-rate data instead of guessing.

## Limits

It needs dense heart rate around the end of the activity, which Fitbit does not always record; otherwise it shows Not enough heart-rate data. Moving about in that first minute, or stopping the activity late, lowers the drop. Compare it across similar workouts, not between different sports.

## Sources

- [Cole CR, et al. Heart-rate recovery immediately after exercise as a predictor of mortality. N Engl J Med 1999;341(18):1351-7](https://doi.org/10.1056/NEJM199910283411804)

## Questions

### Is a heart rate recovery of 25 bpm normal?

In Pulse's bands, 20 bpm or more is Good, 12 to 19 is Typical and under 12 is Low, so 25 is Good. Those cut-offs follow research on treadmill tests, where a drop of 12 bpm or less after the first minute was linked to higher mortality (Cole 1999). A real workout is messier than a lab test, so read one number as a hint and watch your own trend.

### Why does my heart rate recovery change from workout to workout?

Pulse takes one reading per eligible workout, so anything that changes the finish moves it: how hard the last minutes were, whether you kept walking or stopped, heat, caffeine, sleep and the wrist sensor's accuracy. Pulse's research notes call it sound as a personal trend, so compare similar workouts, such as the same run route, and ignore single swings.

### Why does Pulse say Not enough heart-rate data?

Pulse only reports it when the last 5 minutes held 70% of max heart rate for 2 minutes in a row, the last 30 seconds have at least 3 readings, and the window 45 to 75 seconds after the end has at least 3 more. Fitbit does not always record that densely, and Pulse never fills the gap by guessing.

### How is this different from a clinical heart rate recovery test?

The studies behind the 12 bpm line used a supervised treadmill test with a clear stop. Pulse measures free-living workouts from a wrist sensor, so the stop is less clean and the cut-offs do not transfer neatly. It is also unlike the training scores on your device, such as Cardio Load, which add up effort rather than the drop after it. See [Fitness level](https://pulse.portlabs.in/metrics/fitness-level/) for a longer-term fitness measure.

## Related

- [Fitness level](https://pulse.portlabs.in/metrics/fitness-level/index.md)
- [Strain](https://pulse.portlabs.in/metrics/strain/index.md)
- [Resting heart rate](https://pulse.portlabs.in/metrics/resting-heart-rate/index.md)
